+38 050 303 64 15
Home/ Catalogue/ DV 105
Into the plinth · with a fan

Carrera DV 105 plinth convector

The senior plinth cassette: up to 2217 W at 1750 mm when mounted vertically. The same mounting flexibility, more heat.

1043–2217 W90/70 °C · vertical · 2nd speed

How much power do you need? Calculator →

80 or 105

DV 105 is deeper and gives roughly 6–10% more heat at the same lengths. If the plinth allows the depth — take 105; DV 80 fits a tight plinth.

Series features

01

Vertically or horizontally

The same mounting flexibility as DV 80 — plus 6–10% output thanks to the depth.

02

Works without the fan too

With the fan off — 260–750 W by natural convection.

Manufacturer description
DV 105: Specifications of the plinth convector casing with a two-tube heat exchanger and a fan

Specifications of the plinth convector casing with a two-tube heat exchanger and a fan

A two-tube heat exchanger using a copper tube 22 mm in diameter with a 1 mm wall thickness is installed in the DV casing. All heat exchangers are manufactured and undergo outgoing inspection at the factory. It consists of high-quality components (copper and aluminium) from European manufacturers. The compact and well-thought-out design makes it possible to combine in a single casing an energy-efficient motor with a 24-volt supply and smooth control, and a two-tube heat exchanger with a system of silent mountings, heat-exchanger air-blowing guide systems, and to assemble everything into a single system that fits uniformly into the casing and allows the heat exchanger power to be used as productively as possible at the minimum noise level. All DV convectors are fitted with high-quality Taiwanese-made motors with microprocessor control and the ability to smoothly regulate the fan speed range from 0 to 100%. All the appliance specifications underwent laboratory testing and received the corresponding protocols for noise level and thermal performance. And the operating voltage of 24V gives confidence in the safety of use in a domestic environment. The heat-exchanger design makes it possible to provide heat to a larger room area.

Specifications

InstallationInto the plinth, vertically or horizontally
ConvectionForced, 2 speeds; works with the fan off too
Coolant40–90 °C · up to 10 bar
Lengths750–1750 mm

Output by length

Coolant750 mm1000 mm1250 mm1500 mm1750 mm
2nd speed · 90/70 °C755 W1043 W1423 W1820 W2217 W
1st speed · 90/70 °C650 W898 W1225 W1567 W1909 W
Fan off · 90/70 °C260 W350 W480 W620 W750 W

Casing colour options

The casing and grille are painted in any colour from the RAL palette. Below are the popular options.

WhiteRAL 9016
BlackRAL 9005
GreyRAL 7040
AnthraciteRAL 7016
BronzeRAL 1036
CopperRAL 8004

Grilles

The grille is supplied matching the casing per the RAL palette or in contrast; the length — to the unit size. The full selection and materials — in the Grilles section.