Carrera BR 18 skirting water convector
Carrera's lowest skirting line with an innovative heat exchanger — when the convector should blend with the wall instead of the skirting board.
Painting in any RAL colour
BR 18 or BR 21
BR 18 is taken when the minimum line height is critical. If the 21 profile fits — BR 21 gives a third more heat at the same length.
Series features
Innovative heat exchanger
A compact heat exchanger at the minimum height — the line reads as a skirting board, not as a unit.
The loop in one delivery
Corner elements, joints and end caps are counted together with the units — installation won't stall over a missing part.
Painting in any RAL
Casing and grille — to the wall colour so the line blends in, or in contrast as an accent.
The Carrera BR convector for ensuring an even and rapid distribution of heat
Carrera BR skirting convectors are affordable and practical heating devices. They are often used in rooms where perimeter heating is intended, which ensures an even and rapid distribution of heat, and they are also indispensable when reconstructing a heating system. They are installed as the main heat source or in combination with other heating devices depending on the room's purpose and the required thermal regime. The casing of the skirting convector, made of high-quality 1 mm steel, is finished with a wear-resistant powder coating (White as standard) with the option of painting the casing in the RAL palette.
Specifications of the skirting convector casing with a two-tube heat exchanger
The casing of the BR 18 skirting convector houses an innovative 1-tube heat exchanger, while the BR 21 has a 2-tube heat exchanger using copper tube with a diameter of 22 mm and a wall thickness of 1 mm. All heat exchangers are manufactured and pass outgoing inspection at the factory. It is made of high-quality components (copper and aluminium) from European manufacturers. The compact and well-thought-out design of the heat exchanger allows it to quickly supply heat to the room along the perimeter.
Connection features and convenient control
The simplicity of the Carrera BR casing design makes it easy to assemble and install convectors of the required configuration using additional accessories. To regulate the room temperature, heat-regulating valves and thermostatic heads from European manufacturers are used (available for versions with the + T index).
Specifications
| Installation | Along the wall, instead of a skirting board |
| Heat exchanger | Innovative, compact |
| Casing and grille | Painting in any RAL colour |
| Components | Corners, joints, end caps — separately |
| Coolant | 40–90 °C · up to 10 bar |
| Lengths | 1000–2250 mm |
Output by length
| Coolant | 1000 mm | 1500 mm | 2000 mm | 2250 mm |
|---|---|---|---|---|
| BR 18 · 90/70 °C | 379 W | 662 W | 951 W | 1095 W |
| BR 18 · 70/50 °C | 211 W | 368 W | 528 W | 609 W |
Casing colour options
The casing and grille are painted in any colour from the RAL palette. Below are the popular options.
Grilles
The grille is supplied matching the casing per the RAL palette or in contrast; the length — to the unit size. The full selection and materials — in the Grilles section.